Rebed Service

Acqua Bella provides professional on site re-bed services at an affordable rate. Find out if we service your area by emailing us at acquabella@msn.com and tell us where you need service. We will respond.

Key Benefits Of Our Service

	Our equipment is uniquely designed to remove and replace carbon in any style vessel with no mess.
	The power and functionality of our equipment assures you get a job done fast.
	Our technicians are thoroughly trained to be clean, safe and knowledgeable. We inspect each vessel and correct or recommend repairs that may otherwise be overlooked.
	We use only the best carbon, so you get the highest performance.
	Our service is backed by a 100% satisfaction guarantee.

Capabilities

Acqua Bella provides an array of services to satisfy our customer's needs. From small vessels to large municipal tanks, we provide service. Our equipment is specially designed to vacuum out and replace spent carbon in either wet or dry applications. We are keyed to the environmental market and stand ready to respond to your immediate needs.

Up to 200 lbs.: We provide a drum vacuum to remove the spent carbon. This device is portable enough to negotiate service in any size building or room.
Greater than 200 lbs. Re-bed Truck: An engine powered vacuum, truck mounted, is parked near the vessel or entrance to the vessel. Spent carbon is vacuumed into a hopper on board the truck. Moisture is separated from spent carbon. Dust is contained and filtered.
Greater than 1000 lbs. Picture of our Large capacity Carbon Re-bed Rig: A large diesel powered rig is equipped to evacuate spent carbon from any large vessel. As above, the rig is positioned near the vessel and spent carbon is vacuumed into a containment hopper on board the rig. Moisture is separated from the spent carbon and replacement carbon is pneumatically conveyed back into the vessel. Dust is contained and filtered. An overhead boom is used to move large sacks of carbon onto the truck. Forklifts are available to be brought to a site if needed.