Granular Reactivated Carbon For Liquid use (LGAC)
Reactivated 8x40 ( type DSR, supplied by Calgon Carbon Corp.)
DESCRIPTION
DSR-A is a grade
of
reactivated carbon designed for the removal
of organic contaminants from industrial wastewater, groundwater or process water. The carbon is manufactured by the reactivation of
bituminous coal-based virgin and reactivated products to produce a high-density, high surface area and durable product capable of withstanding repeated cycles of use and reactivation.
DSR-A is effective in a wide range of applications and fluctuating flows providing reliable removal of dissolved organic compounds. DSR-A is screened prior to packaging to insure consistent performance and low pressure drop. DSR-A is not to be used for food grade or potable applications.
APPLICATIONS
.
Point source treatment to remove chemicals
.
Pre-treatment to biological waste treatment systems
.
Product recovery from wastewater
. Recycling wastewater
. Polishing effluent from biological waste treatment systems.
DESIGN CONSIDERATIONS
The design of an activated carbon adsorption system is dependent on the adsorbate type, influent concentration, temperature, flow rate, performance objective, and other factors.
Please contact us if you need assistance to properly size your equipment.
SPECIFICATIONS
| Iodine No.mg/g: | 750 min |
| Screen distribution: | <40 U.S. Mesh 5% max |
| Ash content: | 9% max |
| Moisture: | 2% max |
| Apparent Density: | 0.60 g/cc max |
MANUFACTURING
Top of
Page
Catlettsburg. KY