Back to Products

6" ABS Bag Filter housings - To extend the life of your carbon

Sold separately or duplexed as shown, these housings are tough and won't rust. Made of durable ABS plastic and sold with plastic leg supports. The lids thread off and disposable filter bags fit inside. Recommended to be used with carbon adsorption filters to pre-filter solids ahead of the carbon.  Flow rates to 100 gpm, max pressure 100 psi @ 110 degrees F. An optional heavy steel uni-strut support rack is recommended, this replaces the plastic legs.

part # description # of bags pipe size  sold with
FilterABS6X18S Single 6"x18" ABS bag filter housing 1 2"  
FilterABS6x18D Duplex 6"x18" ABS bag filter housing 2 2"  quick couplings
FilterABS6x18Q Quad 6"x18" ABS bag filter housing 4 2" quick couplings
FilterIV42

Option for ABS6x18

 Isolation valves to maintain flow while changing individual filter bags.   2" (2)  isolation valves inserted between filter and tees
Filter SW2 Dual housing steel  support rack   2" solid uni-strut rack
Filter SW4 Quad housing steel  support rack   2" solid uni-strut rack
         

Filter Bags These filter bags are designed to fit into the removable basket (shown left in picture) of the ABS filter housing. Basket can be cleaned and reused repeatedly.

part # micron size
bag6x18-5 5
bag6x18-10 10
bag6x18-25 25
bag6x18-50 50
bag6x18-100 100

 

 

 

 

 

 

 

 

8" ABS Bag Filter housings (dimensional drawing)

  • Bag Vessel is glass-filled polypropylene externally with 316SS basket
     
  • Bag Vessel: 30" deep by 8" diameter
     
  • Gasket material available:
     
    • Viton
    • EPR
       
  • Inlet/Outlet Connections and Configurations
     
    • 2" NPT
       
      • Style 6 Standard (inline side in/side out)
      • Style 8 Optional (same side, side in/side out)
    • 2" BSP
       
      • Style 6 Standard (inline side in/side out)
      • Style 8 Optional (same side, side in/side out)
    • 3" Flange
       
      • Style 2 (side in/bottom out)